Information
The Micron LZ is a self-polishing, copper-based antifouling. Specially developed for all conditions, Micron LZ protects your boat in fresh, salt, and brackish water and can be applied to most substrates.
Micron LZ is suitable for non-planing boats; for speeds above 20 knots, we recommend Interspeed Extra.
Micron LZ CANNOT be applied to aluminium surfaces.
Features of International Micron LZ:
-
Can be applied up to 6 months before launching
-
Suitable for speeds up to 25 knots (46 km/h)
-
Low film build-up
-
Self-polishing properties
-
Recoatable after approx. 6 hours
-
Protects your hull against fouling, algae, aquatic plants and other organisms
-
Suitable for: wood, GRP, steel, iron, and lead
For large quantities and/or large surfaces, feel free to contact us for a quotation.
Tip! Check out our page with essential painting supplies for the best result!
Application per substrate:
-
Polyester (gelcoat): For a new anti-osmosis system, we recommend Gelshield 200, as this primer builds the highest film thickness.
-
Primocon can also be used as an anti-osmosis system and works well as an intermediate coat.
-
Steel/lead/iron: The primer layer can be Primocon or Interprotect.
-
Wood: For wooden surfaces, we recommend Primocon.
How long does the antifouling last?
After painting, the antifouling can easily be stored until the next season. Close the lid properly and briefly turn the can upside down. This ensures the packaging is airtight and prevents drying out. Then place the can upright again and store the antifouling in a frost-free environment.
